Installation

1) Make sure the glass surface is clean and free of contaminants. PLEASE NOTE: Breeze-Ins (R) will only work if the suction cup can be secured on the glass window or door. The suction cup can not be used to attach to any other surface such as architraves or flooring.

 

2) Use the suction cup to place your Breeze-Ins(R) at the height you would like the bottom bar of the roller blind or bottom rail of your venetian blind positioned.

 

 

3) Lower the blind into the clamp, once the blind is in position gently raise the blind up so the top hook of the clip catches on the top of the bar and the blind is secured within it.

 

 

Depending on how windy the conditions are you may have to adjust the amount the window is opened to maintain the clips functionality. To do so remove the bottom rail from the Breeze-Ins(R) by releasing the tension of the blind, pot the rail out of the clip, close the window to the desired opening width and repeat step 3.

 

If you leave the Breeze-Ins (R) attached to the window during very high winds the blind rail will pop put of the clip or the suction cup will release from the window insuring no damage is done to the blind.